 |
|
|
| TFL212P4 | | Proel¿ s TFLV/ TFL flying trapezoidal speaker series is a line of enclosures suitable for installation or touring use, available in hard epoxy texture finish with extremely rugged and anti-scratch coating, or in compact class 1 carpet. The cabinets, designed asymmetrically for wedge monitor applications, are made of 18 mm birch plywood, incorporate a thick metal grille, stand adapter and ergonomic carrying handles for easy transport. Commercial M10 threads/ eyebolts guarantee maximum enclosure suspension facility. High quality woofers feature ISV¿ (Interleaved Sandwich Voice coils) and die-cast baskets with double ventilation design for improved heat dissipation and to reduce power compression. The optimised mechanical excursion is granted by a unique DSS¿ system (Double Silicon Spider), which controls the linearity of the transducer. Low distortion and excellent sound quality are furtherly improved by a DDR¿ system (Double Demodulating Rings). Custom high frequency compression drivers feature titanium diaphragms, flat aluminium wire voice coils, low distortion and extremely good frequency response. Proel¿s own SWG¿ (Spherical Wave Guide) dispersion horn has a coverage of 70°Hx70°V and allows uniform dispersion and clear acoustic response. The TFLV/ TFL speakers feature 12/ 24 dB/ oct passive crossovers with electronic protection for permanent reliability under stress. An external Full Range/Bi-Amp selector allows use in multiple speaker systems. Two professional 4-pin SPK4MP connectors guarantee secure speaker cable locking and excellent power transfer. All Proel speakers are tested according to the AES standard power requirements; all electronic devices are built according to CE norms. A complete series of hardware and accessories is dedicated to the TFLV/ TFL speakers: stands, wall brackets, steel cables, eyebolts, protection covers and professional speaker cables, for the most versatile indoor or outdoor use. Proel offers also four ¿plug ¿n¿ play¿ TFLV/ TFL kits, complete with factory cabled PowerPack¿ racks of amplifiers and optimizer.
Order code
:
TFL212P4 | Image
:
| |
| 
|
|
| | | | Datasheet |
|---|
| System type
:
| 2-way vented enclosure | | Nominal Impedance
:
| 4 ohm | | Input power rating (continuous)
:
| 600
W | | Input power rating (peak)
:
| 1200
W | | Frequency response
:
| 55Hz - 18kHz (-6dB, +6dB) | | Sensitivity
:
| 101dB @ 1W/1m | | Maximum (peak) Output
:
| 131
dB @ 1m | | Low Frequency Device
:
| 2 x 12'' woofer - 3'' voice coil | | High Frequency Device
:
| 1.4'' throat - 3'' titanium voice coil | | Coverage Angle H. (-6 dB)
:
| 70° | | Coverage Angle V. (-6 dB)
:
| 70° | | Trapezoidal taper
:
| 10° | | Monitor Taper
:
| 40° | | Crossover Frequency
:
| 1800 Hz | | Signal Processing
:
| Proel DSO26 (biamp mode) | | Flying System
:
| 4 x M10 - top, bottom, rear | | Connectors
:
| 2 x SPEAKON linked | | Construction
:
| 18mm birch plywood | | Finishing
:
| Carpet | | Mounting Hole
:
| 1 x bottom | | Weight
:
| 32
kg(70.560lb
)
| | Dimensions (W x H x D)
:
| 40 x 87.5 x 43 cm |
|
| | Accessories |
|---|
| NAME | DESCRIPTION | | COVERT22 | Heavy-duty TNT cover for TFLV212P/TFL212P loudspeaker. | | KPTFL212 | Metal system for vertical array arrangement for flying installation of TFLV212P and TFL212P models, in 4 or 2 loudspeaker groups. |
| |
|
|
|
)
